Code name: »super-grout«
The high-performance building material that can be used for large-format bricks and panels with a joint depth of 20 mm or more, thus giving you greater freedom of design and planning. In a not-so-secret mission, our aerodurit® PFK Single Component Special Grout ensures that the world does not get out of joint.
Single-Component Special Grout
Advantages
- Reduces the risk of lime efflorescence
- Single-component, cement-bound
- Good adhesion on the side flanks
- Easy cleaning effect
- High frost/thaw resistance
- High area output
- Waterproof
- Fast hardening
- Acid-proof
- Easily flowable and slurryable
- Early washable
At a glance
Manual processing
Interior and exterior
High daily performance
aerodurit® Characteristics
Renovation, wall dehumidification50%
New buildings, renovation, ecological90%
Thermal insulation, listed buildings10%
Accelerated construction process, durability100%
Description
PFK Single-Component Special Grout
Downloads
Developed from a customer request, internally only referred to as »Super-grout«, aerodurit® PFK displays the usual aerodurit® quality and supports our philosophy »Better not more«. Apart from outstanding performance data, our aim was a high-performance building material that can be used for large-format bricks and tiles from 20 mm joint depth, thus giving you more freedom of design and planning. In a not-so-secret mission, our aerodurit® PFK Single-Component Special Grout ensures that the world does not get out of joint.
With aerodurit® PFK One-Component Special Grout, grouting becomes child's play. For new grouting and repair of pavings and slabbed surfaces made of natural and concrete stone. For the decorative design of terraces, squares and paths that are to be permanently protected against weeds. For the formation of drainage channels and also suitable for light traffic loads of up to 3.5 tons (use category N2 according to ZTV Wegebau). aerodurit® PFK is also suitable as an adhesive slurry for underfloors of all slabs and as an adhesive mortar for tiles, ceramic and concrete slabs.
Professional building material for gardening and landscaping
aerodurit® PFK Single-Component Special Grout reduces the risk of lime efflorescence, is easy to clean, acid-resistant and has a high freeze-thaw resistance. Due to the proven refinement of our building materials with inorganic aerodurit® additives, a quick hardening takes place, which enables a high area output. Available in white (w1), cement grey (zg1), beige (bs1) and anthracite (a1) paint. Other colours available on request.
aerodurit® GIGACEM
High-End Fast-Hardening Cement
The essence of aerodurit® research. Screed and concrete work made easy: Due to easy processing, you can quickly create floor surfaces and walls that are ready for covering and can be walked on soon after - free from synthetic additives and questionable chemicals. Our cement is diffusive, waterproof and extremely resistant.
aerodurit® AS202X
High End Micropore Screed
All-in-one! Laying screed has never been so easy and effective: versatile as a quick screed, lightweight cement screed, insulating screed or heated screed. Accelerated construction process due to high daily output and good levelling properties. Suitable for damp rooms, permanently wet areas, renovation and refurbishment work.
aerodurit® EP2010
Lime-Cement Micropore Specialised Restoration Plaster
Our bestseller. Mineral, non-hydrophobic renovating plaster (active dehumidifying) for permanent problem solution in the case of moisture and mould. High salt resistance, water repellent and very resistant to freeze-thaw changes. High daily output due to the elimination of downtimes and homogeneous plaster structure.
aerodurit® ZEP2040
Cement Micropore Specialised Restoration Plaster
The big brother of aerodurit® EP2010 - the perfect team when the going gets tough. Mineral, non-hydrophobic dehumidifying plaster for drying walls and as a preventive measure in damp areas. High impact resistance and salt resistance make it the ideal hardwall plaster (footing plaster).
